GLOBAL STEEL COMPANY | 24/7 AFTER SALES SUPPORT
Special Steel Includes Cold Work Steel, Hot Work Steel, Plastic Mould Steel, High Speed Steel, High Strength Steel, Abrasion Resistant Steel. These tool materials adhere to great quality demands of steel like temper, strength, toughness, resistance to tempering, hardening capacity, dimensional stability etc. The range of tool steel in our store includes products from renowned manufacturers.
Threading rolls and dies, cold extrusion tools, trimming, cutting and stamping tools for sheet thicknesses up to 6 mm, precision cutting tools for sheet thicknesses up to 12 mm, cold pilger mandrels, circular-shear blades, deep-drawing tools, pressure pads and highly wear-resistant plastic moulds.
DIN | W.Nr | AFNOR | AISI/ASIM | JIS |
---|---|---|---|---|
X155CrVMo12-1 | 1.2379 | Z160CDV12 | D-2 | SKD11 |
C | Si | Mn | P (max) | S (max) | Cr | Mo | V |
---|---|---|---|---|---|---|---|
1.45-1.60 | 0.10-0.60 | 0.20-0.60 | 0.03 | 0.03 | 11.0-13.0 | 0.70-1.00 | 0.70-1.00 |
20°C | 100°C | 250°C | 500°C | |
---|---|---|---|---|
Coefficient of thermal expansion at °C 10-6 m/(W/mk) | 10.5 | 11.5 | 11.9 | 12.2 |
Thermal conductivity at °C (W/mk) | 16.7 | 20.5 | 24.2 |
12 % ledeburitic chromium steel. Combines maximum wear resistance, good toughness, outstanding cutting edge retention and tempering resistance. It can be nitrided after special heat treatment.
TREATMENT | TEMPERATURE | HOLDING TIME (HT) | COOLING | HARDNESS | |
---|---|---|---|---|---|
Annealing | Heat to 830 – 860 °C | Min. H.T. for 2 minute /mm | Furnace | - | |
Stress relieving | Heat to 650 – 700 °C | Min. H.T. for 2 minute /mm | furnace | - | |
Hardening | Heat to 1000 – 1050 °C | Min. H.T. for 1 minute /mm | Air, oil or saltbath, 500 – 550 °C | - |
Chart of tempering values depending on the hardness
°C | 100 | 200 | 300 | 400 | 500 | 525 | 550 | 600 |
---|---|---|---|---|---|---|---|---|
HRC | 63 | 61 | 58 | 58 | 58 | 60 | 56 | 50 |